These table top models can be set up on:
• saw horses with a sheet of plywood
• any conference table
• optional Speed-Well work station

Simple - Trouble-Free - No Moving Parts!
Smooth & Even, Edge to Edge Pasting!
No Skips or Bumps! Paste Keeps Mixing As You Work!
5 Minute Setup & Clean Up! Low Maintenance!

• PW C57 - Commercial 57" (57" wide paste area)
• PW C30 - Commercial 30"
• BW 12.5 - Border Paster
You'll find specs at the bottom of this page...

We Focus On One Basic Gravity Fed Machine,
In 3 Different Sizes:

Versatile!
A single Paste Divider
is included in every
machine, to customize
the width of the
pasting area.

Built to last!
Made in the U.S. of quality plywoods,
to prevent warping, and plated aluminum,
to be light weight and durable.
Contractors are using machines 10+ years old.
All parts are available, every day,
for overnight shipment. However,
the only parts we ever really replace are
the Wiper (squeegee) and lost Adjustment Screws.
Both sell for less than $9!

Add a second Paste Divider
to your PW C57 to paste 2
separate rolls at once.
• Ideal for drop matching.
• Paste narrow strips and
borders at the same time!

Extension Legs are
included with each
Paste-Well, for larger
bolts. Small bolts hang
directly on the back of the
PW's bottom edge.
See Steps
1 & 2
below.

~ CUSTOMER SATISFACTION ~
It is the only reason we've been around since 1966!
We sell hundreds of Paste-Well machines each year!

Saving time increases your profitability.
Our Paste-Wells are designed with that in mind!

Clamp machine to a table. Place vinyl roll on Material Rod. Feed material,
face down, through the machine and under the Front Panel, keeping one edge
flush with a machine side. Slide the Paste Divider flush with the other edge of
the material to customize the paste area to the wallcovering width.

Pour paste.

Turn Front Panel Adjustment Knobs to set the desired paste thickness.
Now you are set up to paste! Pull the material through.

Book back to the machine, and cut against the metal edged Cutting Bar.

To clean up, scoop up residual paste with a putty knife, or small
scoop. Remove the Front Panel,. Cutt off and discard portion of
pasted vinyl. Using a wet sponge, wipe off residual paste from the
machine. That's it. No need for a hose, or a trip to a car wash.

NOTE: All machine
paste areas can be
customized with the
included Paste Divider.